Professional and elegant appearance add grandeur to any room.

WORKSTATIONS

• Modular starter and adder system design

• Overall workstation components:

• Top widths: 36" or 48"W
• Depth: 28-1/2"D
• Shelf: 36" or 48"W x 8"D
• End panels: 48"H x 30"D
• Intermediate panels: 48"H x 30"D

• Cord management:

• 1-1/2"W cord drop
• Runs full width between work surface and back panel
• Allows electrical/data passage

• Assembly method:

• Top attached using steel angled “Z” bracket
• Bracket inserted into routed underside of top
• 5/16"-18 hex-head bolts into metal bushings
• Back panel uses hidden metal keyways and shoulder screws
• Shelf attached using 3/4" x 3/4" aluminum/steel angle brackets (black painted)
• Black #8 screws used throughout

WORKSTATION TOP

• 1-3/16" thick
• 45# density particleboard core
• High-pressure laminate surface (.050" thick)
• Backing sheet: minimum .020" thick (balanced construction)
• Low-glare laminate finish meeting NEMA standards

• Front/visible edge:

• Solid oak external undercut chamfered edge band
• Size: 1-3/4" thick x 2"W
• Laminated after face lamination

• Edge profile:

• Beveled to 3/8" radius bullnose
• 39° bevel angle
• Extends 1-3/4" beyond end/intermediate panels
• Ends notched at 45° angle

• Back edge:

• Black metal band, 1-1/2"W
• Projects 1/4" above surface as retainer

• Adjustable heights:

• 27" (sitting)
• 32" (wheelchair)
• 39" (standing)

END AND INTERMEDIATE PANELS

• Thickness: 1-3/16"
• 3-ply, 45# density particleboard core

• Veneer construction:

• Inside face of end panels: oak veneer
• Both faces of intermediate panels: oak veneer
• Outside face of end panels: framed veneer design

• Framed appearance (end panels):

• 3-1/4" rift-cut oak veneer vertical strips
• 3-1/4" solid wood plinth bottom
• 3-1/4" rift-cut top strip forming 1-1/2"H internal arc
• Center panel: plain-sliced slip-matched ash veneer
• Double-faced end panels include 3"W center rift-cut strip

• Edge treatment:

• 1.6mm solid oak edge band on vertical edges
• 2-1/4"W x 1-1/4"H solid oak top cap
• Top cap slopes outward at 60° angle
• 3/8" radius on front and back edges

• Hardware:

• Two 1-1/4" chrome adjustable glides per panel

BACK PANEL

• 1-3/16" thick
• 3-ply, 45# density particleboard core
• Select oak veneer on both faces

• Design features:

• Top edge shaped in arc form
• Panels stop 1" above bottom of end panels

• Edge banding:

• 1.6mm solid oak on all edges
• All edges eased

WORKSTATION SHELF

• 3/4" thick x 8"D
• 45# density particleboard core
• Select AA slip-matched oak veneer

• Edge banding:

• 3/4" solid oak external band on exposed edge

• Placement:

• Located under work surface
• Extends full width of workstation

WORKING HEIGHTS

• Adjustable at:

• 27"
• 32"
• 39"