Intelligent Design.  Timeless Perfection.

WORK SURFACE

• 1-3/16" thick
• 3-ply, 45# density particleboard core
• High-pressure laminate top surface (.050" thick)
• .020" backing sheet for balanced construction

• Exposed front edge:

• Northern-grown Red Oak or Maple drop edge band
• 5/8" x 1-3/16" thick
• 1/2" radius waterfall shape

• Back edge:

• Metal black strip, 1-1/2"W
• Projects 1/4" above surface as retainer

END PANEL

• Framed panel and plinth base assembly

• Frame construction:

• Solid Northern-grown Red Oak or Maple hardwood rails and stiles
• Veneered panel

• Panel:

• 3/4" thick slip-matched veneer
• Routed on three sides

• Rails and stiles:

• Top rail: 2"H x 1" thick
• Side stiles: 1" x 1" with 1" radius

• Plinth base:

• 5/4 solid Red Oak or Maple
• 2-1/4"H x 1" thick

• Plinth detail:

• Molded top shape with 1" radius
• 1/4" wide reveal

• Assembly:

• Three #8 x 3" flat-head screws
• Wood glue

• Glides:

• Two 7/8" chrome adjustable glides
• Located 1-1/4" from plinth ends

• Attachment method:

• Recessed metal fasteners
• Shoulder screws

BACK PANEL

• Select Northern-grown Red Oak or Maple face veneer
• 3/4" thick
• 3-ply, 45# density particleboard core

• Edge banding:

• 1.6mm solid Oak or Maple on top and bottom edges

• Attachment:

• Recessed metal fasteners
• Shoulder screws

• Double-faced units:

• 3" diameter grommet below work surface
• For electrical and data wire passage

SHELF (MONITOR)

• 1-3/16" thick
• 3-ply, 45# density particleboard core
• High-pressure laminate surface (.050" thick)
• .020" backing sheet for balanced construction
• Low-glare laminate finish meeting or exceeding NEMA standards

• Edge banding:

• Northern-grown Red Oak or Maple flush edge band
• 5/8" x 1-3/16" thick
• 1/2" radius waterfall shape

• Wire management:

• One 3" diameter grommet

SHELF (PRINTER)

• Fascia:

• 1-3/4"H x 3/4" thick solid Oak band

• Core:

• 3/4" thick 3-ply, 45# particleboard

• Edge detail:

• 1/8" radius top front corner

• Construction notes:

• Glue blocks at fascia-to-top intersection

• Mounting:

• Pull-out shelf
• 100 lb capacity nylon glides

SHELF (FIXED)

• 3-ply, 45# density particleboard core
• Northern-grown Red Oak plain-sliced veneer or Maple veneer

• Edge banding:

• 1.6mm solid Oak or Maple on exposed edges