Spec Seats DS100

Your first choice for special portable seating applications requiring optimal comfort.

This popular logo chair is used for special team benches, locker rooms, and fundraising opportunities.

Frame Construction: Roll-formed double tube and channel 19 gauge steel (all perforations in channel - no perforations in rolled tube); fron"K"brace support; approxmately 11" clearance between first cross-brace and floor; seat height from floor apprximately 19"; rear legs have (2) steel embossed cross-braces for extra support/strength; on each chair leg (4) is a molded foot glide over an extra protective smooth "U" shaped metal pronged design hairpin for a secure friction fit.  These are removable only with the use of tools.

Seat Constrution: 11 gauge steel frame; vertical leg approximately .875"W and horizontal leg approximately .625"W forms a rectangular frame measuring approximately 16.5"W x 15.5"L; heavy duty supported vinyl sewn seat; polyurethane foam seat cushion 2.5" to 3" thick; cushion conforms to ASTM D3574, California 117 and BIFMA fire retardant requirements; over .5" thick laminate/wood black chalkboard base with enough vent holes to allow for air discharge; seat fram e and seat assembly will be attached directly by sing vandal proof plated recessed hex head screws.

Colors & Logo: Frame/Uphostery - as per customer selections.  Logo as required on chair backrest, topof seat cushion, and/or front edge.

Minimum 25 year limited metal frame warranty.